Packaging machinery in the packaging process on three major issues
  Putman£ºqetnnAddtime£º2010-10-12 hits£º676
   Packaging machinery is able to complete all or part of the process of product and packaging machinery.

    Packaging process, including filling, wrapping, sealing and other major processes, and the associated processes before and after, such as cleaning, stacking, and demolition. In addition, the package also includes the measurement or in the processes of stamp packages. Mechanical packaging products can increase productivity, reduce labor intensity and to adapt to the needs of large-scale production and meet hygiene requirements.

    Introduces the following:

    First, heat shrink machine is slow or unable to rise to a higher temperature (above 160 degrees Celsius) What are the reasons?

    A: The heater circuit is the main power line through a magnetic switch and then to electric suction pipe, it should be the first detection of smoke magnetic switch contacts are normal. If line does not pass one of the phase, the above phenomenon occurs. If the normal suction magnetic switch can check the meter again to see the phase and the machine is the same ohmic value. If the normal should be short. Such as the phase are connected to wires or heating pipe, but still abnormal, you need to replace the heater.

    Second, equipment, film material at work and can not easily offset the normal feeding how to adjust?

    A: In the equipment in case of film material deviation, adjusted the position and tension of a balanced film roll bar are invalid cases, by adjusting the angle of the triangles to solve this problem. Membrane materials, such as the upper material deviation from the folder chain, can be adjusted on the set square to the clockwise direction; layer of membrane material are expected to deviate from the folder chain, can be adjusted on the set square to the counter-clockwise.

    3, packing six bottles of cluster packing, the electric eye can not detect the packaging, machine work, easy to cut to the packaging, should be adjusted?

    A: The cluster package will affect the margins of the bottle electric eye to detect, when the level of electronic eyes can be detected as the bevel angle adjustment. Adjusted to reduce the electric eye to detect the probability of packaging space to avoid the phenomenon appears indiscriminately.

 

ÓÀ³Ï²ÊƱ|welcomewww.8289.com 1984videos.com © 2010 All Rights Reserved jxzexin.com          power by

| Recruitment | Contact us